RSM SNMP Configuration
RSM provides SNMP support through RSM LE. Support is provided for SNMP traps only. The monitoring and thresholding is performed by RSM LE. These processes include the monitoring for state of health changes, critical events, and tallies that have exceeded a configured threshold. When these conditions occur, RSM LE has the ability to send an SNMP trap.
An RSM license file with the SNMP feature licensed is required to use the SNMP feature.
Note: The Microsoft SNMP Agent must be running to be able to use the RSM SNMP Agent. If RSM SNMP is not running as expected, you need to manually check whether certain settings in the Microsoft SNMP Service are successfully set. For more information about these settings, refer to Microsoft™ SNMP Service Settings
The SNMP agent is disabled by default and must be enabled by the user.
After the SNMP agent is enabled, the system displays the various types of traps and other settings.
To configure these traps and settings, refer to the following sections:
